Speedmaster Wax Bicycle Chain Lube
US Delivery Time: 3-5 Business Days
Outside US Delivery Time: 8-12 Business Days
Product Description
Speedmaster Wax Bicycle Chain Lube
Speedmaster Wax Bicycle Chain Lube - Special formula allows the wax to stays on chain longer. Unlike oil, wax do not attract dirt, as a result, it is long lasting, low maintenance, super clean and lowest friction on your bicycle chain. Simply bath your bicycle chain in our special formulated Speedmaster Wax. Each application can last up to 400+ miles on dry on optimal condition or 200+ miles on wet/dirty condition.Why Wax bath:
If hot wax is poured into cold metal chain, it will form a thick layer of wax. As result, the wax will easily come off in a chunk. However, if you wax bath your chain, and let the chain's temperature rise, it will allow the wax to form a protective layer, which is a better wax adhesive to the metal. At the same time, since the molten wax will have a low viscosity, it can penetrate into the tiny gap of the rollers.
Preparation:
Strip any grease and oil off the chain before waxing. To clean your chain, we recommend using ultrasonic cleaner, degreaser or mineral spirit. This also apply on brand new factory chain. We recommend you to clean your chain ring, rear cogs and pulley wheels as well.
How to wax your chain:
Step 1: Place dry and clean chain (free of oil and dirt) into the wax can.
Step 2: Add water to pot (approx 1 inches tall) and place the wax can into the pot. Bring water to boil. This method is also known as double boiler method.
Step 3: Once the wax is melted, turn the heat down to simmer and let the chain submerge for about 10 minutes.
Step 4: Turn off all heat and let it cool for a while (15-30 minutes). Lastly, take out the chain from the wax can. Once installed, it may requires a few revolutions to loosen up the wax for break-in.
*Please always proceed with caution.
To re-apply old waxed chain, simply repeat the steps. You can also clean your chain before wax re-bath, this way, the wax will last a long time for future use.
Features of Speedmaster Wax Bicycle Chain Lube
Special formula allows the wax to stays on chain longer but soft enough not to break apart and flake off in chunk. Each application can last approx. 400+ miles on optimal condition OR 200+ miles on wet/dirty condition. No maintenance needed in between rides unless the chain starts to squeak. | Super clean, slippery smooth and ultra quiet operation after treatment. Keeping your drivetrain clean and free of excessive dirt built up. No more grease tattoos from chain! | Speedmaster Wax Metal Can offers better heat transfer as melted wax could reach as high as 190F degrees. Double boiler method offers fast, easy and safer way to wax bath your chain. | One Speedmaster Wax can will last up to 10+ treatments. If you clean your chain before every wax treatment, it can even last much longer. For maintenance (optional), use our wax base lube, Speedmaster Wax Liquid Wax. | *Always proceed with caution, as melted wax can be extremely HOT. Product contains PTFE.
Warning - California Proposition 65 This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Product FAQs
Q: How long does each application of Speedmaster Wax Bicycle Chain Lube last?
Ans: Each application can last up to 400+ miles on dry optimal condition or 200+ miles on wet/dirty condition.
Q: How should I prepare my chain before waxing with Speedmaster Wax?
Ans: To prepare your chain, strip any grease and oil off using an ultrasonic cleaner, degreaser, or mineral spirit. This also applies to brand new factory chains. It is recommended to clean your chain ring, rear cogs, and pulley wheels as well.
Q: What is the best method to wax my chain with Speedmaster Wax?
Ans: The best method is to use the double boiler method. Place a dry and clean chain into the wax can, add water to a pot, place the wax can in the pot, bring the water to a boil, let the chain submerge in the melted wax for about 10 minutes, then let it cool before removing. Always proceed with caution as melted wax can be extremely hot.
Q: How many treatments can I get from one Speedmaster Wax can?
Ans: One Speedmaster Wax can will last up to 10+ treatments. If you clean your chain before every wax treatment, it can last even longer.
Q: Is maintenance required in between rides after using Speedmaster Wax?
Ans: No maintenance is needed in between rides unless the chain starts to squeak. The wax provides a super clean, slippery smooth, and ultra quiet operation, keeping your drivetrain clean and free of excessive dirt buildup.
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!