What are the dimensions of the Attwood Heavy-Duty Bilge Pump?

The dimensions are five point ninety-eight inches in length, seven point zero one inches in width, and five point ninety-eight inches in height.

What voltage does this bilge pump operate on?

This bilge pump operates on twelve volts.

What is the flow rate of the Attwood Heavy-Duty Bilge Pump?

The flow rate is one thousand seven hundred gallons per hour.

What materials is the Attwood Heavy-Duty Bilge Pump made from?

The pump features advanced resin compositions designed to resist chemicals and enhance durability.

Is the Attwood Heavy-Duty Bilge Pump CE rated?

Yes, it is CE rated, ensuring it meets safety and performance standards.

How do I install the Attwood Heavy-Duty Bilge Pump?

To install, connect the wiring to a twelve-volt power source and secure the pump in a suitable location.

Is the Attwood Heavy-Duty Bilge Pump suitable for replacing older pumps?

Yes, it easily replaces pumps rated up to two thousand gallons per hour.

How do I operate the Attwood Heavy-Duty Bilge Pump?

Simply connect the pump to a power source, and it will automatically pump out water as needed.

Can this pump be used in saltwater environments?

Yes, the materials used are designed to withstand harsh marine conditions, including saltwater.

What warranty comes with the Attwood Heavy-Duty Bilge Pump?

It comes with a three-year warranty for added peace of mind.

How should I clean the Attwood Heavy-Duty Bilge Pump?

Regularly inspect and clean the pump by removing debris from the intake and rinsing with fresh water.

Is the Attwood Heavy-Duty Bilge Pump safe for continuous use?

Yes, it is designed for heavy-duty use, ensuring durability during extended operation.

What should I do if the pump doesn’t turn on?

Check the power source and wiring connections to ensure they are secure and functioning.

Can I use this bilge pump for other applications?

While designed for bilge water, it may be used for other water pumping applications with similar requirements.

What if the Attwood Heavy-Duty Bilge Pump arrives damaged?

Contact the retailer immediately for assistance with returns or exchanges.

Attwood Marine Attwood Heavy-Duty Bilge Pump 1700 Series - 12V - 1700 Gph / 4730-4 /

$173.82 USD

$173.82 USD $173.82 USD

Attwood Marine Attwood Heavy-Duty Bilge Pump 1700 Series - 12V - 1700 Gph / 4730-4 /

$173.82 USD

$173.82 USD $173.82 USD

SKU: WBSPTB00FZK9Q82

UPC: 959710368859

Brand: Attwood

Availability: In Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

Heavy-Duty Bilge Pump 1700 SeriesPart #: 4730-4Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat.The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps.Features:12VCE Rated36'' Wire3-Year Warranty

Frequently Asked Questions

Q: What are the dimensions of the Attwood Heavy-Duty Bilge Pump? A: The dimensions are five point ninety-eight inches in length, seven point zero one inches in width, and five point ninety-eight inches in height.
Q: What voltage does this bilge pump operate on? A: This bilge pump operates on twelve volts.
Q: What is the flow rate of the Attwood Heavy-Duty Bilge Pump? A: The flow rate is one thousand seven hundred gallons per hour.
Q: What materials is the Attwood Heavy-Duty Bilge Pump made from? A: The pump features advanced resin compositions designed to resist chemicals and enhance durability.
Q: Is the Attwood Heavy-Duty Bilge Pump CE rated? A: Yes, it is CE rated, ensuring it meets safety and performance standards.
Q: How do I install the Attwood Heavy-Duty Bilge Pump? A: To install, connect the wiring to a twelve-volt power source and secure the pump in a suitable location.
Q: Is the Attwood Heavy-Duty Bilge Pump suitable for replacing older pumps? A: Yes, it easily replaces pumps rated up to two thousand gallons per hour.
Q: How do I operate the Attwood Heavy-Duty Bilge Pump? A: Simply connect the pump to a power source, and it will automatically pump out water as needed.
Q: Can this pump be used in saltwater environments? A: Yes, the materials used are designed to withstand harsh marine conditions, including saltwater.
Q: What warranty comes with the Attwood Heavy-Duty Bilge Pump? A: It comes with a three-year warranty for added peace of mind.
Q: How should I clean the Attwood Heavy-Duty Bilge Pump? A: Regularly inspect and clean the pump by removing debris from the intake and rinsing with fresh water.
Q: Is the Attwood Heavy-Duty Bilge Pump safe for continuous use? A: Yes, it is designed for heavy-duty use, ensuring durability during extended operation.
Q: What should I do if the pump doesn’t turn on? A: Check the power source and wiring connections to ensure they are secure and functioning.
Q: Can I use this bilge pump for other applications? A: While designed for bilge water, it may be used for other water pumping applications with similar requirements.
Q: What if the Attwood Heavy-Duty Bilge Pump arrives damaged? A: Contact the retailer immediately for assistance with returns or exchanges.