What is the flow rate of the Don't Miss Automatic Submersible Bilge Pump?

The flow rate is seven hundred fifty gallons per hour. This makes it suitable for efficiently managing bilge water in small boats.

What are the dimensions of this bilge pump?

The dimensions are approximately five point five nine inches in length, two point nine five inches in width, and three point nine four inches in height. This compact size allows for easy installation in tight spaces.

What voltage does this bilge pump operate on?

This bilge pump operates on twelve volts. It's designed to work efficiently with most small boat electrical systems.

How do I install the Don't Miss Bilge Pump?

To install, connect the black wire to negative and the brown wire to positive for automatic mode. For non-automatic mode, follow similar wiring instructions without the brown white wire.

Is this bilge pump suitable for retrofitting?

Yes, it is ideal for retrofitting or new installations. Its compact design simplifies the bilge water management process.

What is the built-in feature of this bilge pump?

It features a built-in float switch that activates the pump automatically when water levels rise. This ensures worry-free operation.

How do I maintain the Don't Miss Bilge Pump?

To maintain it, regularly clean the snap-off strainer for optimal performance. This allows for easy debris removal and keeps the pump in top condition.

Is the Don't Miss Bilge Pump safe to operate?

Yes, it has a built-in electronic controlled reed sensor for automatic operation, minimizing the risk of malfunction.

How do I clean the bilge pump?

Cleaning involves removing the snap-off strainer and base for quick access. This allows you to clear any debris easily.

What is the current rating of this bilge pump?

The current rating is three amps. This ensures efficient operation while keeping power consumption low.

Can this bilge pump handle a lot of water?

Yes, it can handle up to seven hundred fifty gallons of water per hour, making it effective for various boating needs.

What is the outlet diameter of the Don't Miss Bilge Pump?

The outlet diameter is three fourths of an inch, or nineteen millimeters. This size fits standard bilge hoses.

Is this bilge pump easy to install for beginners?

Yes, the installation process is straightforward, making it suitable for beginners with basic electrical knowledge.

What materials are used in this bilge pump?

While specific materials are not listed, it is designed for durability and efficient operation in marine environments.

Does this bilge pump come with a warranty?

Warranty details are not specified, but it's advisable to check with the manufacturer for any available guarantees.

What should I do if the bilge pump stops working?

If it stops working, check the wiring connections and the float switch for any obstructions. Ensure the pump is clean and free of debris.

Dontmiss Automatic Submersible Small Boat Bilge Pump 12V 750Gph Auto With Float Switch 3/4 Inch (19Mm) Outlet Dia, Bilge Pumps F

$33.11 USD

$33.11 USD $47.30 USD

Dontmiss Automatic Submersible Small Boat Bilge Pump 12V 750Gph Auto With Float Switch 3/4 Inch (19Mm) Outlet Dia, Bilge Pumps F

$33.11 USD

$33.11 USD $47.30 USD

SKU: WBSPTB07ZTZZHNP

UPC: 610406938724

Brand: Dontmiss

Availability: Out of Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

Dontmiss automatic bilge pump -750gph compact, automatic, fully submersible electric pump Built-in float switch (No separate float switch is needed) Equipped with built in electronic controlled reed sensor system for easy fully automatic operation No power use until pump is activated by internal float switch (when water level rises) compact, efficient, long life motor Rustproof and corrosion resistant Stainless steel shaft High-impact durable plastic housing Quick release strainer for easy maintenance Extremely efficient, very low current draw and offer high capacity output Water cooled long-life motors Ignition protection to protect the pump against high current Watermoisture tight seals Silent and vibrationless operation Anti-airlock protection Will not burn out when run dry Integrated float switch TEST button at rear of unit can be used with switch panel for manual override Includes comprehensive user manual with installation instructions and wiring diagram

Frequently Asked Questions

Q: What is the flow rate of the Don't Miss Automatic Submersible Bilge Pump? A: The flow rate is seven hundred fifty gallons per hour. This makes it suitable for efficiently managing bilge water in small boats.
Q: What are the dimensions of this bilge pump? A: The dimensions are approximately five point five nine inches in length, two point nine five inches in width, and three point nine four inches in height. This compact size allows for easy installation in tight spaces.
Q: What voltage does this bilge pump operate on? A: This bilge pump operates on twelve volts. It's designed to work efficiently with most small boat electrical systems.
Q: How do I install the Don't Miss Bilge Pump? A: To install, connect the black wire to negative and the brown wire to positive for automatic mode. For non-automatic mode, follow similar wiring instructions without the brown white wire.
Q: Is this bilge pump suitable for retrofitting? A: Yes, it is ideal for retrofitting or new installations. Its compact design simplifies the bilge water management process.
Q: What is the built-in feature of this bilge pump? A: It features a built-in float switch that activates the pump automatically when water levels rise. This ensures worry-free operation.
Q: How do I maintain the Don't Miss Bilge Pump? A: To maintain it, regularly clean the snap-off strainer for optimal performance. This allows for easy debris removal and keeps the pump in top condition.
Q: Is the Don't Miss Bilge Pump safe to operate? A: Yes, it has a built-in electronic controlled reed sensor for automatic operation, minimizing the risk of malfunction.
Q: How do I clean the bilge pump? A: Cleaning involves removing the snap-off strainer and base for quick access. This allows you to clear any debris easily.
Q: What is the current rating of this bilge pump? A: The current rating is three amps. This ensures efficient operation while keeping power consumption low.
Q: Can this bilge pump handle a lot of water? A: Yes, it can handle up to seven hundred fifty gallons of water per hour, making it effective for various boating needs.
Q: What is the outlet diameter of the Don't Miss Bilge Pump? A: The outlet diameter is three fourths of an inch, or nineteen millimeters. This size fits standard bilge hoses.
Q: Is this bilge pump easy to install for beginners? A: Yes, the installation process is straightforward, making it suitable for beginners with basic electrical knowledge.
Q: What materials are used in this bilge pump? A: While specific materials are not listed, it is designed for durability and efficient operation in marine environments.
Q: Does this bilge pump come with a warranty? A: Warranty details are not specified, but it's advisable to check with the manufacturer for any available guarantees.
Q: What should I do if the bilge pump stops working? A: If it stops working, check the wiring connections and the float switch for any obstructions. Ensure the pump is clean and free of debris.