What are the dimensions of the Maxwell HRC10 Horizontal Rope Chain Windlass?

The dimensions are eleven inches in height, seventeen inches in width, and twenty inches in length.

What is the weight of the Maxwell HRC10 Windlass?

The weight is fifty-five pounds, making it sturdy yet manageable for installation.

What materials are used in the construction of the HRC10 Windlass?

It features a marine-grade hard anodised alloy and stainless steel, ensuring durability and corrosion resistance.

What type of chain and rope does the HRC10 accommodate?

It accommodates three eighths inch chain and five eighths inch rope, including splices.

What is the voltage rating of the Maxwell HRC10 Windlass?

The windlass operates at twelve volts, suitable for most marine applications.

How do I install the HRC10 Windlass?

Installation is simple with a bolt-down design, allowing for rapid setup on deck.

Is the HRC10 suitable for larger vessels?

Yes, it is designed for vessels up to sixteen meters, or fifty-two feet, ensuring optimal anchor handling.

How do I operate the HRC10 Windlass for anchoring?

You can use the cone type clutch for manual free fall anchoring or crank recovery as needed.

Can the HRC10 handle all-chain rodes?

Yes, it works effectively with all-chain rodes, providing added security and holding power.

What maintenance is needed for the HRC10 Windlass?

Routine maintenance is easy due to the two-part watertight case that allows quick access.

How can I ensure the longevity of the rope used with the HRC10?

The unique Wave Design chainwheel grips the rope securely without causing damage, increasing its lifespan.

Is the HRC10 Windlass safe for use in harsh marine conditions?

Yes, the sealed oil bath and robust materials provide high efficiency and protection against harsh weather.

What if the HRC10 Windlass arrives damaged?

Contact customer support immediately to address any damage and explore warranty options.

Does the HRC10 Windlass come with a warranty?

Yes, it typically includes a warranty, though details may vary by retailer.

How do I clean and maintain the HRC10 Windlass?

Regularly check for debris and clean the exterior with fresh water to prevent corrosion.

Maxwell Hrc10 Horizontal Rope Chain Windlass - 12V Capstan 3/8'' Chain, 5/8'' Rope

$4,060.92 USD

$4,060.92 USD $4,060.92 USD

Maxwell Hrc10 Horizontal Rope Chain Windlass - 12V Capstan 3/8'' Chain, 5/8'' Rope

$4,060.92 USD

$4,060.92 USD $4,060.92 USD

SKU: WBSPTB00GFVLRK0

Brand: Maxwell

Availability: In Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8'' Chain, 5/8'' Rope. Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlasses has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system. The HRC10 handles 5/8'' rope and 3/8'' chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors. The HRC10 windlass is fitted with Maxwell's unique Wave Design chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval. As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.

Frequently Asked Questions

Q: What are the dimensions of the Maxwell HRC10 Horizontal Rope Chain Windlass? A: The dimensions are eleven inches in height, seventeen inches in width, and twenty inches in length.
Q: What is the weight of the Maxwell HRC10 Windlass? A: The weight is fifty-five pounds, making it sturdy yet manageable for installation.
Q: What materials are used in the construction of the HRC10 Windlass? A: It features a marine-grade hard anodised alloy and stainless steel, ensuring durability and corrosion resistance.
Q: What type of chain and rope does the HRC10 accommodate? A: It accommodates three eighths inch chain and five eighths inch rope, including splices.
Q: What is the voltage rating of the Maxwell HRC10 Windlass? A: The windlass operates at twelve volts, suitable for most marine applications.
Q: How do I install the HRC10 Windlass? A: Installation is simple with a bolt-down design, allowing for rapid setup on deck.
Q: Is the HRC10 suitable for larger vessels? A: Yes, it is designed for vessels up to sixteen meters, or fifty-two feet, ensuring optimal anchor handling.
Q: How do I operate the HRC10 Windlass for anchoring? A: You can use the cone type clutch for manual free fall anchoring or crank recovery as needed.
Q: Can the HRC10 handle all-chain rodes? A: Yes, it works effectively with all-chain rodes, providing added security and holding power.
Q: What maintenance is needed for the HRC10 Windlass? A: Routine maintenance is easy due to the two-part watertight case that allows quick access.
Q: How can I ensure the longevity of the rope used with the HRC10? A: The unique Wave Design chainwheel grips the rope securely without causing damage, increasing its lifespan.
Q: Is the HRC10 Windlass safe for use in harsh marine conditions? A: Yes, the sealed oil bath and robust materials provide high efficiency and protection against harsh weather.
Q: What if the HRC10 Windlass arrives damaged? A: Contact customer support immediately to address any damage and explore warranty options.
Q: Does the HRC10 Windlass come with a warranty? A: Yes, it typically includes a warranty, though details may vary by retailer.
Q: How do I clean and maintain the HRC10 Windlass? A: Regularly check for debris and clean the exterior with fresh water to prevent corrosion.