What material is the Oust MOC 5 Tech Bearing made of?

The Oust MOC 5 Tech Bearing is made of high strength carbon steel. This material ensures durability and performance under extreme conditions.

What are the dimensions of the Oust MOC 5 Tech Bearing?

The Oust MOC 5 Tech Bearing has a size designation of six hundred eight R2Z. This size is standard for skateboard bearings.

How many bearings are included in the set?

The set includes eight bearings. This is sufficient for a complete skateboard setup.

How do I install the Oust MOC 5 Tech Bearings?

To install the bearings, remove the old bearings from your skateboard wheels and press the new ones into place. Ensure they are seated properly for optimal performance.

Are these bearings suitable for beginners?

Yes, the Oust MOC 5 Tech Bearings are suitable for both beginners and advanced skaters. They provide high performance and durability for all skill levels.

Can I use these bearings for downhill skating?

Yes, these bearings are designed for downhill skating. They can handle heavy loads and high speeds, making them ideal for this type of skating.

How do I clean the Oust MOC 5 Tech Bearings?

To clean the bearings, remove the buna rubber seals and use a cleaning solution. Gently scrub and rinse, then allow them to dry before reassembling.

Do these bearings require special maintenance?

No, the Oust MOC 5 Tech Bearings do not require special maintenance. Regular cleaning and lubrication will keep them in good condition.

What is the lifespan of these bearings?

The lifespan of the Oust MOC 5 Tech Bearings varies with use but can last thousands of skating hours. Proper care will extend their life significantly.

How do these bearings compare to Swiss Bearings?

The Oust MOC 5 Tech Bearings are higher quality than Swiss Bearings. They offer superior performance and durability specifically designed for street skating.

What is the warranty on the Oust MOC 5 Tech Bearings?

The warranty policy for the Oust MOC 5 Tech Bearings may vary by retailer. Check with the seller for specific warranty details.

What if the bearings arrive damaged?

If the bearings arrive damaged, you should contact the retailer for a return or exchange. Most retailers have policies in place for such issues.

Are these bearings suitable for all skateboards?

Yes, these bearings are suitable for all standard skateboards. They fit the common bearing size used in most skateboard wheels.

Is the material used in these bearings eco-friendly?

The Oust MOC 5 Tech Bearings are not explicitly labeled as eco-friendly. However, their durable construction means less frequent replacements.

Do these bearings come with a storage case?

No, the Oust MOC 5 Tech Bearings do not come with a storage case. They are sold as a set of eight without additional packaging.

Can I use these bearings for rollerblading?

No, the Oust MOC 5 Tech Bearings are specifically designed for skateboarding. They may not fit rollerblading wheels properly.

Oust Bearings: Moc 5 Tech (Set Of 8)

$41.42 USD

$41.42 USD $41.42 USD

Oust Bearings: Moc 5 Tech (Set Of 8)

$41.42 USD

$41.42 USD $41.42 USD

SKU: WBSPTB012JWTPJS

UPC: 017406030203

Brand: Oust Bearings

Availability: In Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

The Oust Moc 5 Tech Bearing was designed to handle the rigors and abuse in technical street skating, hard impacts from big street tricks, and heavy loads from downhill slides or drifting. Some of the roughest street skateboarding is reached during huge ollies, blunts slides, grinds, and various demanding technical tricks. Downhill skateboarding applies tremendous axial and torsional loads while a board is in a turn or slide. To maximize the strength of the MOC 5 Tech bearing, a high strength carbon steel ball cage is used in place of a nylon ball retainer, which bends and breaks much easier. This cage ensures the ball placement stays aligned in the harshest skating conditions and extends the bearing life for thousands of skating hours. The MOC 5 Tech Bearing is manufactured with the same high precision specifications as the MOC 7 Speed bearings. The MOC 5 Tech bearing has two removable buna rubber seals for proper bearing protection, and to provide better service for the bearing when the seals are removed. Higher quality than Swiss Bearings. These bearings are proudly made in the U.S.A.

Frequently Asked Questions

Q: What material is the Oust MOC 5 Tech Bearing made of? A: The Oust MOC 5 Tech Bearing is made of high strength carbon steel. This material ensures durability and performance under extreme conditions.
Q: What are the dimensions of the Oust MOC 5 Tech Bearing? A: The Oust MOC 5 Tech Bearing has a size designation of six hundred eight R2Z. This size is standard for skateboard bearings.
Q: How many bearings are included in the set? A: The set includes eight bearings. This is sufficient for a complete skateboard setup.
Q: How do I install the Oust MOC 5 Tech Bearings? A: To install the bearings, remove the old bearings from your skateboard wheels and press the new ones into place. Ensure they are seated properly for optimal performance.
Q: Are these bearings suitable for beginners? A: Yes, the Oust MOC 5 Tech Bearings are suitable for both beginners and advanced skaters. They provide high performance and durability for all skill levels.
Q: Can I use these bearings for downhill skating? A: Yes, these bearings are designed for downhill skating. They can handle heavy loads and high speeds, making them ideal for this type of skating.
Q: How do I clean the Oust MOC 5 Tech Bearings? A: To clean the bearings, remove the buna rubber seals and use a cleaning solution. Gently scrub and rinse, then allow them to dry before reassembling.
Q: Do these bearings require special maintenance? A: No, the Oust MOC 5 Tech Bearings do not require special maintenance. Regular cleaning and lubrication will keep them in good condition.
Q: What is the lifespan of these bearings? A: The lifespan of the Oust MOC 5 Tech Bearings varies with use but can last thousands of skating hours. Proper care will extend their life significantly.
Q: How do these bearings compare to Swiss Bearings? A: The Oust MOC 5 Tech Bearings are higher quality than Swiss Bearings. They offer superior performance and durability specifically designed for street skating.
Q: What is the warranty on the Oust MOC 5 Tech Bearings? A: The warranty policy for the Oust MOC 5 Tech Bearings may vary by retailer. Check with the seller for specific warranty details.
Q: What if the bearings arrive damaged? A: If the bearings arrive damaged, you should contact the retailer for a return or exchange. Most retailers have policies in place for such issues.
Q: Are these bearings suitable for all skateboards? A: Yes, these bearings are suitable for all standard skateboards. They fit the common bearing size used in most skateboard wheels.
Q: Is the material used in these bearings eco-friendly? A: The Oust MOC 5 Tech Bearings are not explicitly labeled as eco-friendly. However, their durable construction means less frequent replacements.
Q: Do these bearings come with a storage case? A: No, the Oust MOC 5 Tech Bearings do not come with a storage case. They are sold as a set of eight without additional packaging.
Q: Can I use these bearings for rollerblading? A: No, the Oust MOC 5 Tech Bearings are specifically designed for skateboarding. They may not fit rollerblading wheels properly.