What is the material of the Panther Safe-Skeg?

The Panther Safe-Skeg is made of three hundred sixteen marine-grade stainless steel, ensuring durability and corrosion resistance.

What are the dimensions of the Safe-Skeg?

The Safe-Skeg measures approximately zero point seventy-five inches in length, nine point zero two inches in width, and seventeen point ninety-nine inches in height.

Is the Safe-Skeg polished?

Yes, the Safe-Skeg is brilliantly polished with a seamless design, enhancing its aesthetic appeal and functionality.

How do I install the Panther Safe-Skeg?

Installation takes only minutes and comes with all necessary mounting hardware, instructions, an Allen wrench, and Loctite two hundred sixty-two.

Is the Safe-Skeg suitable for my Honda Outboard?

Yes, it is designed to fit Honda Outboards with one hundred thirty to two hundred twenty-five horsepower from two thousand four to present, and one hundred fifteen horsepower from two thousand ten to present.

Can I use the Safe-Skeg on other brands of outboards?

No, the Safe-Skeg is specifically designed for certain Honda Outboard models and may not fit other brands.

How do I maintain the Safe-Skeg?

To maintain the Safe-Skeg, regularly check for any signs of wear or corrosion, and clean it with fresh water after use in saltwater.

Is the Safe-Skeg resistant to corrosion?

Yes, it contains a drain hole to protect against corrosion and freeze-up, enhancing its longevity.

How thick is the material of the Safe-Skeg?

The material thickness of the Safe-Skeg is one point five millimeters, which is fifty percent thicker than the competition.

What warranty does Sierra offer on the Safe-Skeg?

Sierra offers an industry-leading customer satisfaction warranty, covering defects in workmanship and materials for the useful life of the product.

What is included in the Safe-Skeg kit?

The kit includes the Safe-Skeg, all mounting hardware, installation instructions, an Allen wrench, and Loctite two hundred sixty-two.

Does the Safe-Skeg require a skid plate?

No, the skid plate is not necessary due to the extra thickness in the Safe-Skeg material.

What if my Safe-Skeg arrives damaged?

If the Safe-Skeg arrives damaged, contact Sierra for assistance with repairs or replacements under the warranty.

Can I return the Safe-Skeg if I'm not satisfied?

Yes, you can return the Safe-Skeg if you are not satisfied, following the return policy outlined by the retailer.

Panther 35-Ss685 Safe-Skeg - Honda Outboard (130, 150, 200, 225 Hp), 2004-Present

$156.91 USD

$156.91 USD $156.91 USD

Panther 35-Ss685 Safe-Skeg - Honda Outboard (130, 150, 200, 225 Hp), 2004-Present

$156.91 USD

$156.91 USD $156.91 USD

SKU: WBSPTB004ZJBM2C

UPC: 836125003684

Brand: Marinetech

Availability: In Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

Sierra International 35-SS685 Marine-Grade Stainless Steel Panther Safe-Skeg for Honda 135-150-200-225 HP 4-Stroke, 2004 to Present AND 115 HP 4-Stroke, 2010 to Present Whether youre looking to protect your new skeg, repair your damaged one or just want to add some shine,Sierras Panther Safe-Skegs 316 Marine-Grade Stainless Steel Construction is brilliantly polished and installation takes only minutes!Sierra offers a full line of Ultimate Skeg Protection and Repair. ADDITIONAL DETAILS Offers 316 Marine-Grade Stainless Steel Protection Brilliantly Polished with a Seamless Design Contains a Drain Hole to Protect Against Corrosion and Freeze-Up Installation Takes Only Minutes Material Thickness: 1.5mm (50% Thicker than the Competition) Skid Plate is Not Necessary due to Extra Thickness in the Safe-Skeg Material Kit Includes: Safe-Skeg, Mounting Hardware, Instructions, Allen Wrench and Loctite 262 APPLICATION INFORMATION Designed to Fit: Honda Outboard - 135-150-200-225 HP, 4-Stroke from Years 2004 through Present Honda Outboard - 115 HP, 4-Stroke from Years 2010 through Present ABOUTSierraSierra is dedicated to protecting you and your investment. For 50 yearsSierra, one of the most trusted names in the marine industry, has proudly been offering high quality engine and drive parts. Their products meet or exceed the original equipment part it replaces and are engineered to meet today's high horsepower engine demands while withstanding the harsh marine environment.Sierra'S CUSTOMER SATISFACTION WARRANTY AllSierra parts qualify forSierra's Industry Leading Customer Satisfaction Warranty.Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If aSierra product fails to comply with the warranty,Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can viewSierra's full warranty located above in the Technical Specification Section.

Frequently Asked Questions

Q: What is the material of the Panther Safe-Skeg? A: The Panther Safe-Skeg is made of three hundred sixteen marine-grade stainless steel, ensuring durability and corrosion resistance.
Q: What are the dimensions of the Safe-Skeg? A: The Safe-Skeg measures approximately zero point seventy-five inches in length, nine point zero two inches in width, and seventeen point ninety-nine inches in height.
Q: Is the Safe-Skeg polished? A: Yes, the Safe-Skeg is brilliantly polished with a seamless design, enhancing its aesthetic appeal and functionality.
Q: How do I install the Panther Safe-Skeg? A: Installation takes only minutes and comes with all necessary mounting hardware, instructions, an Allen wrench, and Loctite two hundred sixty-two.
Q: Is the Safe-Skeg suitable for my Honda Outboard? A: Yes, it is designed to fit Honda Outboards with one hundred thirty to two hundred twenty-five horsepower from two thousand four to present, and one hundred fifteen horsepower from two thousand ten to present.
Q: Can I use the Safe-Skeg on other brands of outboards? A: No, the Safe-Skeg is specifically designed for certain Honda Outboard models and may not fit other brands.
Q: How do I maintain the Safe-Skeg? A: To maintain the Safe-Skeg, regularly check for any signs of wear or corrosion, and clean it with fresh water after use in saltwater.
Q: Is the Safe-Skeg resistant to corrosion? A: Yes, it contains a drain hole to protect against corrosion and freeze-up, enhancing its longevity.
Q: How thick is the material of the Safe-Skeg? A: The material thickness of the Safe-Skeg is one point five millimeters, which is fifty percent thicker than the competition.
Q: What warranty does Sierra offer on the Safe-Skeg? A: Sierra offers an industry-leading customer satisfaction warranty, covering defects in workmanship and materials for the useful life of the product.
Q: What is included in the Safe-Skeg kit? A: The kit includes the Safe-Skeg, all mounting hardware, installation instructions, an Allen wrench, and Loctite two hundred sixty-two.
Q: Does the Safe-Skeg require a skid plate? A: No, the skid plate is not necessary due to the extra thickness in the Safe-Skeg material.
Q: Is the Safe-Skeg suitable for high horsepower engines? A: Yes, the Safe-Skeg is engineered to meet today’s high horsepower engine demands while withstanding harsh marine environments.
Q: What if my Safe-Skeg arrives damaged? A: If the Safe-Skeg arrives damaged, contact Sierra for assistance with repairs or replacements under the warranty.
Q: Can I return the Safe-Skeg if I'm not satisfied? A: Yes, you can return the Safe-Skeg if you are not satisfied, following the return policy outlined by the retailer.