What materials are included in the RaceWax Core Shot Ski Base Repair Kit?

The kit includes P-Tex rods made of high-density polyethylene, a metal base scraper, and buffing pads. It also features Metal Grip bonding material for enhanced adhesion.

What are the dimensions of the P-Tex rods in the kit?

Each P-Tex rod is eight millimeters in diameter and approximately one hundred ninety millimeters long. There are five clear and five black rods included.

How many buffing pads come with the RaceWax kit?

The kit includes three buffing pads: one medium maroon, one fine gray, and one non-abrasive white pad. These pads are designed for effective base buffing after repairs.

How do I use the RaceWax Core Shot Ski Base Repair Kit?

Begin by cleaning the damaged area of the ski or snowboard. Melt the Metal Grip using a chisel tip soldering iron, then apply P-Tex over the repaired area for a smooth finish.

Is the RaceWax kit suitable for beginners?

Yes, the kit is designed for both beginners and experienced skiers. Clear instructions are included to guide users through the repair process.

Can I use this kit on snowboard bases?

Yes, the RaceWax Core Shot Ski Base Repair Kit is suitable for both ski and snowboard bases. It effectively repairs various types of base damage.

What is the best way to store the RaceWax repair kit?

Store the kit in a cool, dry place away from direct sunlight. Keep the P-Tex rods and Metal Grip in their original packaging to maintain their quality.

Are there any special care instructions for the buffing pads?

Yes, wash the buffing pads gently with mild soap and air dry. Avoid using them on excessively rough surfaces to prolong their lifespan.

How often should I perform maintenance on my ski or snowboard bases?

Regular maintenance is recommended after every few skiing sessions, especially if you notice base damage or wear. This helps ensure optimal performance.

How does the Metal Grip improve base repairs?

Metal Grip enhances the bond between the base material and the ski edges or core. It significantly decreases repair time and provides a durable finish.

Is the RaceWax repair kit effective for deep base damages?

Yes, the kit is specifically designed to address deep base damages using Metal Grip for a strong bond and P-Tex for a smooth finish.

Can I return the RaceWax Core Shot Ski Base Repair Kit if I'm not satisfied?

Yes, the kit is typically covered by a return policy. Check with the retailer for specific return guidelines and conditions.

What if the kit arrives damaged?

If the RaceWax kit arrives damaged, contact the retailer immediately for a replacement or refund. Keep the original packaging for potential returns.

Is a soldering iron included with the RaceWax repair kit?

No, a chisel tip soldering iron is not included in the kit. It is recommended to purchase one separately for melting the Metal Grip.

Does the RaceWax kit come with detailed instructions?

Yes, the kit includes comprehensive instructions for using each component effectively. This ensures users can complete repairs successfully.

Racewax Core Shot Ski Base Repair Kit 5/5 Clear/Black Ptex Metal Grip

$34.60 USD

$34.60 USD $34.60 USD

Racewax Core Shot Ski Base Repair Kit 5/5 Clear/Black Ptex Metal Grip

$34.60 USD

$34.60 USD $34.60 USD

SKU: WBSPTB07GC6BG9Z

UPC: 814358022511

Brand: Racewax

Availability: In Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

P-Tex Rods for base repairs 5 clear ptex rods 5 black ptex rods 8 mm diameter About 190 mm long (75 inches) long Metal base scraper Use this for P-Tex work on ski and snowboard bases Suitable for light base planing Vinyl storage sleeve for metal scraper included 3M Brand Base BuffingTreatment FibertexScotchbrite Pads (45 in x 6 in) for buffing base after repair 1 Medium (Maroon) 1 Fine (gray) 1 Non-abrasive (White) large non-woven nylon impregnated with ultra-fine abrasive Metal grip Ski Snowboard Base Bonding Material: Allows base material to adhere to the ski edges and core, offering a much better bond than co-polymer Metal grip is designed to fill up half the repair area that is against the ski core or edge Once metal grip has been applied, standard p-tex base repair material is laid over it for a finished repair Metal grip will work for repairs where a base patch has been the traditional method, decreasing the work time significantly A chisel tip soldering iron (found at tool and hardware stores) is recommended to melt metal grip into the base One, 1 foot rope of Black Metal grip One, 1 foot rope of clear Metal grip

Frequently Asked Questions

Q: What materials are included in the RaceWax Core Shot Ski Base Repair Kit? A: The kit includes P-Tex rods made of high-density polyethylene, a metal base scraper, and buffing pads. It also features Metal Grip bonding material for enhanced adhesion.
Q: What are the dimensions of the P-Tex rods in the kit? A: Each P-Tex rod is eight millimeters in diameter and approximately one hundred ninety millimeters long. There are five clear and five black rods included.
Q: How many buffing pads come with the RaceWax kit? A: The kit includes three buffing pads: one medium maroon, one fine gray, and one non-abrasive white pad. These pads are designed for effective base buffing after repairs.
Q: How do I use the RaceWax Core Shot Ski Base Repair Kit? A: Begin by cleaning the damaged area of the ski or snowboard. Melt the Metal Grip using a chisel tip soldering iron, then apply P-Tex over the repaired area for a smooth finish.
Q: Is the RaceWax kit suitable for beginners? A: Yes, the kit is designed for both beginners and experienced skiers. Clear instructions are included to guide users through the repair process.
Q: Can I use this kit on snowboard bases? A: Yes, the RaceWax Core Shot Ski Base Repair Kit is suitable for both ski and snowboard bases. It effectively repairs various types of base damage.
Q: What is the best way to store the RaceWax repair kit? A: Store the kit in a cool, dry place away from direct sunlight. Keep the P-Tex rods and Metal Grip in their original packaging to maintain their quality.
Q: Are there any special care instructions for the buffing pads? A: Yes, wash the buffing pads gently with mild soap and air dry. Avoid using them on excessively rough surfaces to prolong their lifespan.
Q: How often should I perform maintenance on my ski or snowboard bases? A: Regular maintenance is recommended after every few skiing sessions, especially if you notice base damage or wear. This helps ensure optimal performance.
Q: How does the Metal Grip improve base repairs? A: Metal Grip enhances the bond between the base material and the ski edges or core. It significantly decreases repair time and provides a durable finish.
Q: Is the RaceWax repair kit effective for deep base damages? A: Yes, the kit is specifically designed to address deep base damages using Metal Grip for a strong bond and P-Tex for a smooth finish.
Q: Can I return the RaceWax Core Shot Ski Base Repair Kit if I'm not satisfied? A: Yes, the kit is typically covered by a return policy. Check with the retailer for specific return guidelines and conditions.
Q: What if the kit arrives damaged? A: If the RaceWax kit arrives damaged, contact the retailer immediately for a replacement or refund. Keep the original packaging for potential returns.
Q: Is a soldering iron included with the RaceWax repair kit? A: No, a chisel tip soldering iron is not included in the kit. It is recommended to purchase one separately for melting the Metal Grip.
Q: Does the RaceWax kit come with detailed instructions? A: Yes, the kit includes comprehensive instructions for using each component effectively. This ensures users can complete repairs successfully.