What is the rope diameter for the Ronstan RF5010 C-cleat?

The rope diameter is between three millimeters and twelve millimeters, which is approximately one eighth inch to one half inch.

What materials are used in the construction of the Ronstan RF5010 C-cleat?

The cleat is made from carbon fiber composite cams and long strand glass fiber reinforced polymer for the base.

What are the dimensions of the Ronstan RF5010 C-cleat?

The dimensions are three inches in length, two and a half inches in width, and one and a half inches in height.

How do I use the Ronstan RF5010 C-cleat?

To use the cleat, simply insert the rope into the cam and pull it through to secure it. To release, pull the rope with enough force to disengage the cam.

Is the Ronstan RF5010 C-cleat suitable for all types of lines?

Yes, it is designed for a range of applications, including control lines, jib sheets, and mainsheet cleating.

What applications is the Ronstan RF5010 C-cleat suitable for?

It can be used for various control line applications, including jib sheets and mainsheet cleating.

How do I care for the Ronstan RF5010 C-cleat?

To keep the cleat in good condition, rinse it with fresh water after use, especially if it has been exposed to saltwater.

Is the Ronstan RF5010 C-cleat corrosion-resistant?

Yes, it is made with corrosion-free materials, including carbon fiber composite and stainless steel.

What should I do if the Ronstan RF5010 C-cleat arrives damaged?

If it arrives damaged, contact customer support immediately for assistance with returns or exchanges.

How does the Ronstan RF5010 C-cleat perform under high loads?

The unique design, including self-cleaning bearings, ensures consistent high performance even under high static loads.

Can I use the Ronstan RF5010 C-cleat for small lines?

Yes, it is capable of securely cleating even the smallest lines due to its constant torque design.

What features minimize line entry effort in the Ronstan RF5010 C-cleat?

The cam profile and multi-coil spring design minimize the effort required for line entry and release.

Does the Ronstan RF5010 C-cleat have any special bearing features?

Yes, it features unique self-lubricating slotted bearings that provide consistent performance.

Is the Ronstan RF5010 C-cleat lightweight?

Yes, it is designed to be strong yet lightweight, making it ideal for various applications.

What is the warranty for the Ronstan RF5010 C-cleat?

The warranty details may vary by retailer, so check with the seller for specific warranty information.

Ronstan Rf5010 C-Cleat Cam Cleat - Medium - Grey W/Grey Base

$43.40 USD

$43.40 USD $43.40 USD

Ronstan Rf5010 C-Cleat Cam Cleat - Medium - Grey W/Grey Base

$43.40 USD

$43.40 USD $43.40 USD

SKU: WBSPTB0000AXVHN

UPC: 782516480889

Brand: Ronstan

Availability: Out of Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

C-Cleat Cam Cleat - Medium - Grey w/Grey Base3-12mm(1/8'' - 1/2'') Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.Features:Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistanceCam profile and multi-coil spring minimise line entry and release effortCarbon fiber compoasite cam material provides maximum resistance to heat and abrasionUnique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loadsApplications:Range of cleats for all requirements including control lines, jib sheet and mainsheet cleatingMaterials:Carbon fiber composite camsLong strand glass fiber reinforced polymer basePTFE impregnated Acetal slotted bearingStainless steel multi-coil spring

Frequently Asked Questions

Q: What is the rope diameter for the Ronstan RF5010 C-cleat? A: The rope diameter is between three millimeters and twelve millimeters, which is approximately one eighth inch to one half inch.
Q: What materials are used in the construction of the Ronstan RF5010 C-cleat? A: The cleat is made from carbon fiber composite cams and long strand glass fiber reinforced polymer for the base.
Q: What are the dimensions of the Ronstan RF5010 C-cleat? A: The dimensions are three inches in length, two and a half inches in width, and one and a half inches in height.
Q: How do I use the Ronstan RF5010 C-cleat? A: To use the cleat, simply insert the rope into the cam and pull it through to secure it. To release, pull the rope with enough force to disengage the cam.
Q: Is the Ronstan RF5010 C-cleat suitable for all types of lines? A: Yes, it is designed for a range of applications, including control lines, jib sheets, and mainsheet cleating.
Q: What applications is the Ronstan RF5010 C-cleat suitable for? A: It can be used for various control line applications, including jib sheets and mainsheet cleating.
Q: How do I care for the Ronstan RF5010 C-cleat? A: To keep the cleat in good condition, rinse it with fresh water after use, especially if it has been exposed to saltwater.
Q: Is the Ronstan RF5010 C-cleat corrosion-resistant? A: Yes, it is made with corrosion-free materials, including carbon fiber composite and stainless steel.
Q: What should I do if the Ronstan RF5010 C-cleat arrives damaged? A: If it arrives damaged, contact customer support immediately for assistance with returns or exchanges.
Q: How does the Ronstan RF5010 C-cleat perform under high loads? A: The unique design, including self-cleaning bearings, ensures consistent high performance even under high static loads.
Q: Can I use the Ronstan RF5010 C-cleat for small lines? A: Yes, it is capable of securely cleating even the smallest lines due to its constant torque design.
Q: What features minimize line entry effort in the Ronstan RF5010 C-cleat? A: The cam profile and multi-coil spring design minimize the effort required for line entry and release.
Q: Does the Ronstan RF5010 C-cleat have any special bearing features? A: Yes, it features unique self-lubricating slotted bearings that provide consistent performance.
Q: Is the Ronstan RF5010 C-cleat lightweight? A: Yes, it is designed to be strong yet lightweight, making it ideal for various applications.
Q: What is the warranty for the Ronstan RF5010 C-cleat? A: The warranty details may vary by retailer, so check with the seller for specific warranty information.