What are the dimensions of the Ronstan Series 20 Ball Bearing Block?

The dimensions are four point zero two inches in length, two point zero one inches in width, and one inch in height.

What is the maximum rope diameter that this block can accommodate?

The maximum rope diameter is six millimeters, which is approximately one quarter of an inch.

How do I use the Ronstan Series 20 Ball Bearing Block?

To use the block, attach it to your dinghy control lines, vangs, or traveler controls for efficient sailing adjustments.

Is the Ronstan Series 20 Ball Bearing Block suitable for beginners?

Yes, it is suitable for beginners as well as experienced sailors, providing low friction and high performance.

Can this block be used for different sailing applications?

Yes, it is designed for various applications, including dinghy control lines, vangs, cunninghams, and traveler controls.

How should I care for the Ronstan Series 20 Ball Bearing Block?

To maintain it, regularly clean with fresh water after use and ensure that no debris is lodged in the bearings.

Is the Ronstan Series 20 Ball Bearing Block resistant to UV damage?

Yes, it features U.V. stabilized materials to resist degradation from sunlight exposure.

What is the weight of the Ronstan Series 20 Ball Bearing Block?

The block weighs twenty grams, making it lightweight and easy to handle.

Does the Ronstan Series 20 Ball Bearing Block have a load capacity?

Yes, it has a breaking load capacity of five hundred fifty kilograms, which is about one thousand two hundred ten pounds.

What should I do if the block arrives damaged?

If the block arrives damaged, contact customer support immediately for a replacement or return instructions.

Is there a warranty for the Ronstan Series 20 Ball Bearing Block?

Yes, it typically comes with a manufacturer's warranty, but be sure to check the specific details upon purchase.

Can I use this block in saltwater conditions?

Yes, the materials used are suitable for saltwater environments, as they are resistant to corrosion.

What type of sailing is the Ronstan Series 20 Ball Bearing Block best suited for?

It is best suited for dinghy sailing where lightweight and low friction performance are essential.

Does the block require any special installation tools?

No special tools are required; basic sailing equipment is sufficient for installation.

How does the weight of this block compare to similar products?

At twenty grams, it is lighter than many comparable blocks, enhancing overall sailing efficiency.

Ronstan Series 20 Ball Bearing Block - Single

$33.32 USD

$33.32 USD $33.32 USD

Ronstan Series 20 Ball Bearing Block - Single

$33.32 USD

$33.32 USD $33.32 USD

SKU: WBSPTB0016ZDE88

Brand: Ronstan

Availability: Out of Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

Series 20 Ball Bearing Block - SingleFeatures:Low frictionHigh static and dynamic load capacityLightweightPrecision molded Acetal sheaves running on stainless steel or Torlon ball bearings provide high performance & low frictionApplications:Dinghy control linesDinghy VangsCunninghamsTraveller controlsMaterials:U.V. Stabilized Acetal sheavesStainless steel ball bearingsGrade 316 stainless steel load strap and head fittingImpact and UV resistant, fiber reinforced Nylon cheeksSpecifications:Sheave :20mm(3/4'')Max. Rope :6mm(1/4'')Pin : 3mm(1/8'').:250kg(550lbs)B. L.:550kg(1,210lbs)Weight:20g()

Frequently Asked Questions

Q: What materials are used in the Ronstan Series 20 Ball Bearing Block? A: The Ronstan Series 20 Ball Bearing Block is made of U.V. stabilized Acetal sheaves, stainless steel ball bearings, and grade 316 stainless steel load strap and head fitting.
Q: What are the dimensions of the Ronstan Series 20 Ball Bearing Block? A: The dimensions are four point zero two inches in length, two point zero one inches in width, and one inch in height.
Q: What is the maximum rope diameter that this block can accommodate? A: The maximum rope diameter is six millimeters, which is approximately one quarter of an inch.
Q: How do I use the Ronstan Series 20 Ball Bearing Block? A: To use the block, attach it to your dinghy control lines, vangs, or traveler controls for efficient sailing adjustments.
Q: Is the Ronstan Series 20 Ball Bearing Block suitable for beginners? A: Yes, it is suitable for beginners as well as experienced sailors, providing low friction and high performance.
Q: Can this block be used for different sailing applications? A: Yes, it is designed for various applications, including dinghy control lines, vangs, cunninghams, and traveler controls.
Q: How should I care for the Ronstan Series 20 Ball Bearing Block? A: To maintain it, regularly clean with fresh water after use and ensure that no debris is lodged in the bearings.
Q: Is the Ronstan Series 20 Ball Bearing Block resistant to UV damage? A: Yes, it features U.V. stabilized materials to resist degradation from sunlight exposure.
Q: What is the weight of the Ronstan Series 20 Ball Bearing Block? A: The block weighs twenty grams, making it lightweight and easy to handle.
Q: Does the Ronstan Series 20 Ball Bearing Block have a load capacity? A: Yes, it has a breaking load capacity of five hundred fifty kilograms, which is about one thousand two hundred ten pounds.
Q: What should I do if the block arrives damaged? A: If the block arrives damaged, contact customer support immediately for a replacement or return instructions.
Q: Is there a warranty for the Ronstan Series 20 Ball Bearing Block? A: Yes, it typically comes with a manufacturer's warranty, but be sure to check the specific details upon purchase.
Q: Can I use this block in saltwater conditions? A: Yes, the materials used are suitable for saltwater environments, as they are resistant to corrosion.
Q: What type of sailing is the Ronstan Series 20 Ball Bearing Block best suited for? A: It is best suited for dinghy sailing where lightweight and low friction performance are essential.
Q: Does the block require any special installation tools? A: No special tools are required; basic sailing equipment is sufficient for installation.
Q: How does the weight of this block compare to similar products? A: At twenty grams, it is lighter than many comparable blocks, enhancing overall sailing efficiency.