What is the size of the SBS 10 inch Surf & SUP Fin?

The fin measures ten inches in depth and six and a half inches in base width. This size makes it suitable for larger longboards and paddleboards.

What material is the SBS Surf & SUP Fin made from?

The fin is constructed from glass-filled nylon. This material provides durability and flexibility for optimal performance.

What is the rake angle of the fin?

The rake angle of the fin is twenty-eight degrees. This design aids in providing good hold during turns and noseriding.

How do I install the SBS Surf & SUP Fin?

You can install the fin using the included no-tool fin screw and plate. This allows for quick and easy installation without any additional tools.

Is this fin compatible with all paddleboards?

Yes, the fin is compatible with ninety-nine percent of stand-up paddleboards. It works with all hard SUPs and several popular inflatable models.

Can this fin be used on a surfboard?

Yes, this fin is designed for use on both surfboards and stand-up paddleboards. It fits any standard fin box.

How should I care for my SBS Surf & SUP Fin?

To maintain the fin, rinse it with fresh water after each use. This prevents saltwater corrosion and extends its lifespan.

Is this fin safe to use in rough waters?

Yes, the fin is designed to provide stability and control in various water conditions. However, always exercise caution in rough waters.

What should I do if the fin arrives damaged?

If the fin arrives damaged, contact customer support for assistance. They can guide you through the return or replacement process.

Is this fin suitable for beginners?

Yes, this fin is suitable for beginners and experienced surfers alike. Its design offers stability and ease of use.

Does the fin come with a warranty?

Yes, the fin typically comes with a warranty covering manufacturing defects. Check the product details for specific terms.

Can this fin be used with inflatable paddleboards?

It can be used with some inflatable paddleboards, but not all. Refer to the compatibility chart for specific models.

What is the weight of the fin?

The fin weighs approximately one pound. Its lightweight design enhances performance during paddling.

Does the fin include any accessories?

Yes, the fin includes a fin screw, plate, and a free sticker with your purchase. All hardware needed for installation is included.

Is this fin suitable for noseriding?

Yes, this fin is specifically designed to provide good hold for noseriding. Its classic template supports performance in this area.

Sbs 10'' Surf & Sup Fin - Free No Tool Fin Screw - 10 Inch Center Fin For Longboard, Surfboard & Paddleboard

$25.58 USD

$25.58 USD $25.58 USD

Sbs 10'' Surf & Sup Fin - Free No Tool Fin Screw - 10 Inch Center Fin For Longboard, Surfboard & Paddleboard

$25.58 USD

$25.58 USD $25.58 USD

SKU: WBSPTB0157UM1MC

UPC: 747906949216

Brand: Santa Barbara Surfin

Availability: In Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

Our Santa Barbara Surfing 10in fin is a perfect fit for Longboards and Standup Paddleboards either with or without side fins A good fit for a bigger longboard (9 and longer) andor a bigger surfer Fits any US standard fin box and comes with both the brass slider pin and the fin screw and plate great for surfing, noseriding, and flat water touring Ready to put on your board and get in the water Direct fit for all standard fin boxes of longboards and surfboards with single or tri 2+1 fin setups And for sups that includes all paddleboards including BIc Stand Up Paddleboards and other popular Paddle Boards found at REI and other outlets There are some inflatable paddleboards this will not fit on, refer to the photos This sup fin will get you on the water and stoked out of your mind This Sup fin is a great paddleboard accessory and would be a great paddleboard gift Purchase our sup fin and get a free sticker as well as all the free hardware: fin screw and plate, and brass slider pin compatible with: 99% of SUPs All Hard SUPs All Fiberglass SUPs All Epoxy SUPs Tower Xplorer 14 iSUP (Version 2) Tower Adventurer 2 104 x 6 iSUP Tower classic 10A6A Tower Mini 7A10A carbon cross-Link SUP Tower Fit 10A6A carbon cross-Link SUP Tower Social 11A5A carbon cross-Link Tower g-SUP 106 All-Around Tower Weekender 12A6A carbon cross-Link SUP Tower competitor 12A6A carbon Matrix Bic Sport Peformer Bic Sport Peformer Soft Bic Sport Peformer Wind Bic Sport cross Bic Sport cross Soft Bic Sport Wing Bic Sport c-TEc TRAcER Bic Sport c-TEc Wave Bic Sport SUP AIR Bic Sport SUP AIR RIVER Bic Sport SUP AIR TOURINg Bic Sport SUP AIR WIND Bic Sport DURA-TEc ORIgINAL Bic Sport WIND Bic Sport SUP AIR WIND Bic Sport BIScAYNE Bic Sport NOVA ScOTIA Bic Sport TORRE Bic Sport THE PASS Many More

Frequently Asked Questions

Q: What is the size of the SBS 10 inch Surf & SUP Fin? A: The fin measures ten inches in depth and six and a half inches in base width. This size makes it suitable for larger longboards and paddleboards.
Q: What material is the SBS Surf & SUP Fin made from? A: The fin is constructed from glass-filled nylon. This material provides durability and flexibility for optimal performance.
Q: What is the rake angle of the fin? A: The rake angle of the fin is twenty-eight degrees. This design aids in providing good hold during turns and noseriding.
Q: How do I install the SBS Surf & SUP Fin? A: You can install the fin using the included no-tool fin screw and plate. This allows for quick and easy installation without any additional tools.
Q: Is this fin compatible with all paddleboards? A: Yes, the fin is compatible with ninety-nine percent of stand-up paddleboards. It works with all hard SUPs and several popular inflatable models.
Q: Can this fin be used on a surfboard? A: Yes, this fin is designed for use on both surfboards and stand-up paddleboards. It fits any standard fin box.
Q: How should I care for my SBS Surf & SUP Fin? A: To maintain the fin, rinse it with fresh water after each use. This prevents saltwater corrosion and extends its lifespan.
Q: Is this fin safe to use in rough waters? A: Yes, the fin is designed to provide stability and control in various water conditions. However, always exercise caution in rough waters.
Q: What should I do if the fin arrives damaged? A: If the fin arrives damaged, contact customer support for assistance. They can guide you through the return or replacement process.
Q: Is this fin suitable for beginners? A: Yes, this fin is suitable for beginners and experienced surfers alike. Its design offers stability and ease of use.
Q: Does the fin come with a warranty? A: Yes, the fin typically comes with a warranty covering manufacturing defects. Check the product details for specific terms.
Q: Can this fin be used with inflatable paddleboards? A: It can be used with some inflatable paddleboards, but not all. Refer to the compatibility chart for specific models.
Q: What is the weight of the fin? A: The fin weighs approximately one pound. Its lightweight design enhances performance during paddling.
Q: Does the fin include any accessories? A: Yes, the fin includes a fin screw, plate, and a free sticker with your purchase. All hardware needed for installation is included.
Q: Is this fin suitable for noseriding? A: Yes, this fin is specifically designed to provide good hold for noseriding. Its classic template supports performance in this area.