What is the size of the SBS 8 inch fin?

The fin measures eight inches in length. It is designed to fit standard fin boxes commonly found on longboards and paddleboards.

What materials is the SBS fin made from?

This fin is made from glass-filled nylon. This material provides strength and durability for various water activities.

What is the weight of the SBS fin?

The fin weighs approximately zero point four pounds. This lightweight design ensures easy handling and installation.

How do I install the fin on my board?

To install the fin, simply slide it into the fin box and secure it using the included no-tool fin screw. It can be done without any additional tools.

Is the SBS fin compatible with all boards?

No, this fin is not compatible with every board. It fits most standard US fin boxes but may not work with certain inflatable SUPs.

Can I use this fin for surfing?

Yes, this fin is suitable for both surfing and paddleboarding. It provides good stability for noseriding and flat water touring.

How should I clean and maintain the fin?

To clean the fin, rinse it with fresh water after each use. Avoid using abrasive cleaners to maintain its condition.

Is the fin safe for children to use?

Yes, the fin is safe for children when used under adult supervision. Ensure they are using it on a suitable board.

What is the recommended storage for the fin?

Store the fin in a cool, dry place away from direct sunlight. Avoid excessive heat to prevent warping.

How does this fin compare to other sizes?

The eight-inch fin offers a balance of maneuverability and stability. For more hold and drive, consider upgrading to a nine or ten-inch fin.

Is this fin suitable for beginners?

Yes, this fin is an excellent choice for beginners. It offers stability and ease of use for those new to paddleboarding and surfing.

What if my fin arrives damaged?

If the fin arrives damaged, please contact customer support. They will assist you with return or replacement options.

Can I use this fin for racing on my SUP?

Yes, this fin can be used for racing. Its design provides good speed and control, making it suitable for competitive paddling.

Will this fin fit my inflatable paddleboard?

This fin may not fit all inflatable paddleboards. Check compatibility with your specific board model before purchasing.

What type of riding is this fin best for?

This fin is best for noseriding, flat water touring, and general recreational use. It enhances performance on various water conditions.

Sbs 8'' Longboard & Sup Single Fin - Free No Tool Fin Screw - 8 Inch Center Fin For Surfboard & Paddleboard

$20.71 USD

$20.71 USD $20.71 USD

Sbs 8'' Longboard & Sup Single Fin - Free No Tool Fin Screw - 8 Inch Center Fin For Surfboard & Paddleboard

$20.71 USD

$20.71 USD $20.71 USD

SKU: WBSPTB0145KHIYG

UPC: 029741495609

Brand: Santa Barbara Surfin

Availability: In Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

The Santa Barbara Surfing 8'' fin is a perfect fit for Longboards and Standup Paddleboards either with or without side fins. Fits any US standard fin box and comes with both the brass slider pin and the fin screw and plate. Great for surfing, noseriding, and flat water touring. Ready to put on your board and get in the water. Direct fit for all standard fin boxes of longboards and surfboards with single or tri 2+1 fin setups. And for sups that includes all paddleboards including BIC Stand Up Paddleboards and other popular Paddle Boards found at REI and other outlets. There are some inflatable paddleboards this will not fit on, refer to the photos. This sup fin will get you on the water and stoked out of your mind. This Sup fin is a great paddleboard accessory and would be a great paddleboard gift. Purchase our sup fin and get a free sticker as well as all the free hardware: fin screw and plate, and brass slider pin. Compatible with: 99% of SUPs All Hard SUPs All Fiberglass SUPs All Epoxy SUPs Tower Xplorer 14' iSUP (Version 2) Tower ''Adventurer 2'' 10'4'' x 6'' iSUP Tower Classic 106 Tower Mini 710 Carbon Cross-Link SUP Tower Fit 106 Carbon Cross-Link SUP Tower Social 115 Carbon Cross-Link Tower G-SUP 10'6'' All-Around Tower Weekender 126 Carbon Cross-Link SUP Tower Competitor 126 Carbon Matrix Bic Sport Peformer Bic Sport Peformer Soft Bic Sport Peformer Wind Bic Sport Cross Bic Sport Cross Soft Bic Sport Wing Bic Sport C-TEC TRACER Bic Sport C-TEC Wave Bic Sport SUP AIR Bic Sport SUP AIR RIVER Bic Sport SUP AIR TOURING Bic Sport SUP AIR WIND Bic Sport DURA-TEC ORIGINAL Bic Sport WIND Bic Sport SUP AIR WIND Bic Sport BISCAYNE Bic Sport NOVA SCOTIA Bic Sport TORRE Bic Sport THE PASS Many More.....

Frequently Asked Questions

Q: What is the size of the SBS 8 inch fin? A: The fin measures eight inches in length. It is designed to fit standard fin boxes commonly found on longboards and paddleboards.
Q: What materials is the SBS fin made from? A: This fin is made from glass-filled nylon. This material provides strength and durability for various water activities.
Q: What is the weight of the SBS fin? A: The fin weighs approximately zero point four pounds. This lightweight design ensures easy handling and installation.
Q: How do I install the fin on my board? A: To install the fin, simply slide it into the fin box and secure it using the included no-tool fin screw. It can be done without any additional tools.
Q: Is the SBS fin compatible with all boards? A: No, this fin is not compatible with every board. It fits most standard US fin boxes but may not work with certain inflatable SUPs.
Q: Can I use this fin for surfing? A: Yes, this fin is suitable for both surfing and paddleboarding. It provides good stability for noseriding and flat water touring.
Q: How should I clean and maintain the fin? A: To clean the fin, rinse it with fresh water after each use. Avoid using abrasive cleaners to maintain its condition.
Q: Is the fin safe for children to use? A: Yes, the fin is safe for children when used under adult supervision. Ensure they are using it on a suitable board.
Q: What is the recommended storage for the fin? A: Store the fin in a cool, dry place away from direct sunlight. Avoid excessive heat to prevent warping.
Q: How does this fin compare to other sizes? A: The eight-inch fin offers a balance of maneuverability and stability. For more hold and drive, consider upgrading to a nine or ten-inch fin.
Q: Is this fin suitable for beginners? A: Yes, this fin is an excellent choice for beginners. It offers stability and ease of use for those new to paddleboarding and surfing.
Q: What if my fin arrives damaged? A: If the fin arrives damaged, please contact customer support. They will assist you with return or replacement options.
Q: Can I use this fin for racing on my SUP? A: Yes, this fin can be used for racing. Its design provides good speed and control, making it suitable for competitive paddling.
Q: Will this fin fit my inflatable paddleboard? A: This fin may not fit all inflatable paddleboards. Check compatibility with your specific board model before purchasing.
Q: What type of riding is this fin best for? A: This fin is best for noseriding, flat water touring, and general recreational use. It enhances performance on various water conditions.