What materials are included in the Inflatable Boat Repair Kit?

The kit includes polyvinyl chloride patches and two thirty-gram tubes of glue. These materials are designed specifically for repairing inflatable products.

What are the dimensions of the patches in the kit?

Each patch measures three point nine three inches by three point nine three inches. This size is suitable for various inflatable repairs.

How many patches come in the Inflatable Boat Repair Kit?

The kit contains four patches in total. They include one black, one gray, one white, and one dark blue patch.

How do I use this repair kit?

To use the kit, fully exhaust the inflatable, clean the damaged area, and apply glue according to the instructions. Wait for the glue to cure for twenty-four hours before using the repaired item.

Is the glue in the kit safe for all inflatable materials?

Yes, the glue is effective on most inflatable materials, including PVC. However, always test a small area first to ensure compatibility.

Can I use this kit on water toys?

Yes, this repair kit is suitable for water toys as well as inflatable boats and airbeds. It provides a reliable repair solution for various inflatable items.

What precautions should I take when using the glue?

Avoid contact with eyes and do not swallow the glue. Always store the glue in a sealed container to prevent degradation.

How do I store the glue after using it?

To keep the glue in good condition, cover the opening with a preservative film or plastic bag and tighten the cap after each use.

What should I do if the repair doesn’t hold?

If the repair fails, ensure the area is clean and dry, then reapply glue and use a larger patch if necessary. Follow the application instructions carefully.

Is there a shelf life for the glue in this kit?

Yes, the glue has a limited shelf life. Store it in a cool, dry place and check for expiration before use.

Are there any special storage requirements for the patches?

Keep the patches in a cool, dry location away from direct sunlight to maintain their adhesive properties.

How do I apply the patches correctly?

Apply the glue evenly on both the patch and the damaged area, press firmly, and allow it to cure for twenty-four hours for best results.

Is this kit suitable for beginners?

Yes, the kit is user-friendly and includes step-by-step instructions, making it suitable for beginners and experienced users alike.

What if I receive a damaged kit?

If the kit arrives damaged, contact the seller for a replacement or refund. Most sellers have a return policy in place for defective items.

Can I use heat to assist in the repair process?

Yes, using a hair dryer on low heat can help increase the viscosity of the glue, making it easier to bond the patch to the inflatable.

What types of inflatable products can this kit repair?

This repair kit can be used on inflatable boats, airbeds, bouncers, and water toys, making it versatile for various applications.

Sea Dog Water Sports Inflatable Boat Repair Kit, 4 X Pvc Patch, 2 X 30G Glue

$22.82 USD

$22.82 USD $22.82 USD

Sea Dog Water Sports Inflatable Boat Repair Kit, 4 X Pvc Patch, 2 X 30G Glue

$22.82 USD

$22.82 USD $22.82 USD

SKU: WBSPTB07DL96QZM

UPC: 787477281513

Brand: Sea Dog Water Sports

Availability: In Stock

Sold by Onlinesportsmall, an authorized reseller.

Returns accepted within 15 days | support@onlinesportsmall.com

Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Double-boxed, fully insured & discreetly packaged
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 15 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · 25% restocking fee applies

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@onlinesportsmall.com +1 (832) 344-5453

View Full Return & Refund Policy

Description

product Included: 2x 30g glue 1x black plc patch 1 x gray plc patch 1 x white plc patch 1 x dark blue plc patch plc patch size : 393 x 393 inch Procedures for repairing hole (1) Exhaust the inflatable product fully, clean the air leakage area completely and remove all dirt (2) Take out the repair piece, pay attention that this piece of rubber shall be a few centimeters larger than the broken area (3) Apply the repair glue on the air leakage area and bottom of the repair piece evenly, donAt apply more In total apply the glue twice, 5 minutes between each time After applying the glue twice, in order to make the glue sticky, wait for 10-15 minutes (4) Stick the repair piece with the glue side to the damaged area, press with blunt tool vigorously (the hair drier could be used at this time, the hot wind could strengthen the viscosity) (5) Apply little glue around the repair piece after 12 hours (6) The repair work is completed after 24 hours The damaged product is revitalized Warm tips: 1 Never let it to contact eyes or swallow it 2 In order to avoid the glue from deteriorating or volatilizing after long-time laying, use preservative film or plastic bag to cover the month after using every time, and then tighten the glue cover

Frequently Asked Questions

Q: What materials are included in the Inflatable Boat Repair Kit? A: The kit includes polyvinyl chloride patches and two thirty-gram tubes of glue. These materials are designed specifically for repairing inflatable products.
Q: What are the dimensions of the patches in the kit? A: Each patch measures three point nine three inches by three point nine three inches. This size is suitable for various inflatable repairs.
Q: How many patches come in the Inflatable Boat Repair Kit? A: The kit contains four patches in total. They include one black, one gray, one white, and one dark blue patch.
Q: How do I use this repair kit? A: To use the kit, fully exhaust the inflatable, clean the damaged area, and apply glue according to the instructions. Wait for the glue to cure for twenty-four hours before using the repaired item.
Q: Is the glue in the kit safe for all inflatable materials? A: Yes, the glue is effective on most inflatable materials, including PVC. However, always test a small area first to ensure compatibility.
Q: Can I use this kit on water toys? A: Yes, this repair kit is suitable for water toys as well as inflatable boats and airbeds. It provides a reliable repair solution for various inflatable items.
Q: What precautions should I take when using the glue? A: Avoid contact with eyes and do not swallow the glue. Always store the glue in a sealed container to prevent degradation.
Q: How do I store the glue after using it? A: To keep the glue in good condition, cover the opening with a preservative film or plastic bag and tighten the cap after each use.
Q: What should I do if the repair doesn’t hold? A: If the repair fails, ensure the area is clean and dry, then reapply glue and use a larger patch if necessary. Follow the application instructions carefully.
Q: Is there a shelf life for the glue in this kit? A: Yes, the glue has a limited shelf life. Store it in a cool, dry place and check for expiration before use.
Q: Are there any special storage requirements for the patches? A: Keep the patches in a cool, dry location away from direct sunlight to maintain their adhesive properties.
Q: How do I apply the patches correctly? A: Apply the glue evenly on both the patch and the damaged area, press firmly, and allow it to cure for twenty-four hours for best results.
Q: Is this kit suitable for beginners? A: Yes, the kit is user-friendly and includes step-by-step instructions, making it suitable for beginners and experienced users alike.
Q: What if I receive a damaged kit? A: If the kit arrives damaged, contact the seller for a replacement or refund. Most sellers have a return policy in place for defective items.
Q: Can I use heat to assist in the repair process? A: Yes, using a hair dryer on low heat can help increase the viscosity of the glue, making it easier to bond the patch to the inflatable.
Q: What types of inflatable products can this kit repair? A: This repair kit can be used on inflatable boats, airbeds, bouncers, and water toys, making it versatile for various applications.